Hydraulic Machine Lab Instruments |
| Engineering Laboratory Equipments is recognized as the premier manufacturer, exporters and suppliers of. Hydraulic Machine Lab Instrument We, at Engineering Laboratory Equipments has a vision to develop & design Hydraulic Machine Lab Instrument so as to meet the customers requirement through continual endeavor & innovation. Our company is well managed with a team of highly qualified personnel with an experience of more than two decades and active involvements in foreign business to develop. |
|
|
Centrifugal Blower Test Rig (MLABS-HMLI-011)
This equipment comprises of a FD Fan Centrifugal Blower coupled to a DC Motor. Three interchangeable impellers with forward, backward and radial vanes are provided with the test rig. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Blower.
A Pitot Tube is provided in the delivery line of blower for static and dynamic pressure measurement
Experiments
- To study the effect of forward curved, back curved and radial curved impeller
- To find out the discharge, head and efficiency of the Centrifugal Blower
- To plot the graph Efficiency Vs Discharge
- To plot the graph Discharge Vs Head
Utilities Required
- Electricity 1 kW, 440V AC, single Phase
- Floor Area 2.5 x 0.75 m
|
|
|
|
Axial Fan Test Rig (MLABS-HMLI-012)
This equipment comprises of a Axial Flow Fan coupled to a DC motor. Power input to the DC motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM indicator with proximity sensor indicates the RPM if Axial Fan.
A pitot tube is provided in the delivery line of the Axial Fan for static and dynamic pressure measurement.
Experiments
- To find out the discharge, head and efficiency of the Axial Fan
- To plot the graph Efficiency Vs Discharge
- To plot the graph Discharge Vs Head
Utilities Required
- Electricity 1 kW, 440V AC, single Phase
- Floor Area 2.5 x 0.75 m
|
|
|
|
Single Stage Air Compressor Test Rig (MLABS-HMLI-013)
Single Stage Air Compressor Test Rig consists of a single stage reciprocating type air compressor driven by 1 HP motor through a belt. The outlet of the air compressor is connected to reservoir (Tank) and suction is connected to another air tank with a calibrated orifice plate and a water manometer. Below is fitted on one side of this air tank to regulate the flow. Temperature of inlet and outlet of air and pressure at outlet can be measured by thermometer and pressure gauge.
Experiments
- To calculate the volumetric efficiency
- To calculate isothermal HP
- To calculate compression ratio
Utilities Required
- Electricity 2kW, 220VAC,Single Phase
- Floor Area 1.5 x 0.75 m
- Tachometer for R.P.M measurement
|
|
|
|
|
|
|
